• Skip to primary navigation
  • Skip to main content
Extreme Coatings

Call: 888-367-2569

Plastics Industry Association Member

Engineered Surfaces to Extend Service Life and Performance

  • Home
  • About Us
    • Shows and Events
    • News
    • Houston Facility
  • Our Processes
    • High Velocity Thermal Spray
    • The Process
    • Encapsulation Protection
      • Full Encapsulation of Feedscrews
      • Partial Encapsulation of Feedscrews
    • Chrome Plating Replacement
      • Feedscrews, Mixing Rotors, etc.
      • Mud Rotors and Downhole Tools
  • Applications
    • Plastic & Rubber Industries
      • Feedscrews
      • Parallel Twin Feedscrews
      • Co-Rotating Twin Feedscrews
      • Ultrasonic Welding Horns
      • Cushion Master
      • Continuous Mixing Rotors
      • Mixer Bodies
      • Extrusion Dies, Die Plates, Sheet Dies
      • Granulator Knife Blades
      • High intensity Mixing Blades
      • Elbows For Pneumatic Conveying
      • Spin Dryer System
    • Oil & Gas Industry
      • Downhole Mud Rotors
      • Mandrels
    • Motorsports Industry
    • Marine Anti-Fouling
  • Technical Resources
    • Coating Formulas
      • Tungsten/Chromium Carbide
      • NiBoride
      • Other
    • Test Results
      • Abrasive Wear Test ASTM G65
      • Adhesive Wear Test ASTM G77
    • Case Studies
    • FAQs
    • Company Literature
    • ROI
    • Videos
  • How to Buy
    • Our Distributors
    • Purchase Encouragement Program (PEP)
    • Warranty
  • Contact Us
    • Application Profile Form
  • HVOF Thermal Spray
    Extreme Layer of Protection
    High Performance Formulas
  • Oil and Gas Industry
    Reduce Replacement Costs for Mud Rotors
    HVOF CPR delivers more abrasion and corrosion resistance than hard chrome plating (HCP) - even in high chloride environments
    Read More
  • Read More
    Twin Feedscrews
    Our high percentage carbide layer can provide from two to four times more wear life depending on fill loading.
    Plastic Injection Molding
  • Single Feedscrews
    Read More
    Feedscrews
    Our coatings are perfect for injection molders and extruders when processing fiberglass, calcium carbonate, titanium dioxide and metals, ceramic or other highly abrasive fillers.
  • Mixer-Extruders
    Continuous Mixing Rotors
    Our C1000 tungsten carbide has been used as chrome replacement in aggressive applications. C1000 doubles the working life of rotors compared to hard chrome plating.
    Read More
You are here: Home / Our Processes / The Extreme Coatings Process

The Extreme Coatings Process

  1. Inspect new or reconditioned part to be processed

  2. Confirm all processing details and coating formulae

  3. Strip & repair as necessary to OEM spec minus coating specification

  4. Prepare the surface via grit blast

  5. Application of the coating via HVOF

  6. Sprayed and sealed – application dependent

  7. Finish polishing with diamond abrasive

  8. Inspect and measure

  9. Part complete with mirror finish

Key Points:

Our process has key elements to obtain the desired specifications and high quality standards:

  • 100% QA inspection of received parts to confirm the correct pre-coating dimensions are correct, tool marks removed, coated area matches drawing, materials of construction, hardness and confirming formula match.
  • QC Measurement of parts before and after each step ensures quality throughout the process to meet the desired coating specification.
  • Precise control and calculation of the powder formula deposition rate based on the part and solution to reach desired machine part specification (+ 0/-.002” (.0508 mm).
  • Methodical combination of rotation and traverse speed to control heat input and deposition rate of selected coating formulation to minimize internal stresses.
  • Post coating heat straightening to meet industry/drawing requirements for TIR
  • Consistent monitoring of the polishing system to ensure product meets QC dimensional data desired to pass final inspection.
Click here to increase the life of your mud rotors
Click here to increase the life of your extrusion & feed screws
Extreme Coatings

2895 46th Ave N - St. Petersburg, FL 33714

ISO 9001 2015 Certified by WCS ISO 9001:2015 Certified by WCS

888-367-2569

© 2015-2025, All rights reserved
Site by: Industrial Webworks, LLC

MENU
  • Home
  • About Us
    • Shows and Events
    • News
    • Houston Facility
  • Our Processes
    • High Velocity Thermal Spray
    • The Process
    • Encapsulation Protection
      • Full Encapsulation of Feedscrews
      • Partial Encapsulation of Feedscrews
    • Chrome Plating Replacement
      • Feedscrews, Mixing Rotors, etc.
      • Mud Rotors and Downhole Tools
  • Applications
    • Plastic & Rubber Industries
      • Feedscrews
      • Parallel Twin Feedscrews
      • Co-Rotating Twin Feedscrews
      • Ultrasonic Welding Horns
      • Cushion Master
      • Continuous Mixing Rotors
      • Mixer Bodies
      • Extrusion Dies, Die Plates, Sheet Dies
      • Granulator Knife Blades
      • High intensity Mixing Blades
      • Elbows For Pneumatic Conveying
      • Spin Dryer System
    • Oil & Gas Industry
      • Downhole Mud Rotors
      • Mandrels
    • Motorsports Industry
    • Marine Anti-Fouling
  • Technical Resources
    • Coating Formulas
      • Tungsten/Chromium Carbide
      • NiBoride
      • Other
    • Test Results
      • Abrasive Wear Test ASTM G65
      • Adhesive Wear Test ASTM G77
    • Case Studies
    • FAQs
    • Company Literature
    • ROI
    • Videos
  • How to Buy
    • Our Distributors
    • Purchase Encouragement Program (PEP)
    • Warranty
  • Contact Us
    • Application Profile Form
BraXe Rotors Inquiry
Sending